I feel, among the best all-around defensive handguns for home use is the .38 Special revolver with a short barrel. The short-barreled .38 offers a host of advantages over the auto loader and a time-tested track record second to none.
The double-action revolver is simple enough for the occasional user. The .38 Special isn’t our most powerful cartridge, but it has all of the recoil that the occasional shooter wishes to handle. With proper loads, it will serve for personal defense.
A double-action revolver offers plenty of leverage in the case of a struggle for the handgun if the shooter hangs onto the grip—the short barrel limits the felons leverage if they get their hands on your handgun. Another advantage is that a revolver may be fired, time after time, when thrust into the adversary’s body, which isn’t true of a self-loader.
The problem is that a reliable revolver at a fair price is difficult to find. Among the best buys on the market is the Armscor Model 206—a 2-inch barrel .38 Special revolver. The M206 isn’t the prettiest revolver you will ever see. It is designed to sell for around $250. This means the final finish isn’t going to be satin blue. The parkerized finish is businesslike. There are tool marks visible internally, and the overall look is that of an economically-priced revolver.
The M206 bears a close resemblance to Colt revolvers. The cylinder release pulls to the rear in the Colt fashion. The cylinder holds six shots and rotates to the right. The sights are broad and easy to use well, although I added red paint to the front sight to allow proper sighting. The matte colored front sight faded from view as issued. The action is more similar to Smith and Wesson than Colt, but what matters is that the revolver fires with every press of the trigger.
The ejector rod is shrouded under the barrel. The hammer spur is long and easily cocked for single action fire. But be careful in firing as the long hammer spur may butt into the web of your hand if you let the revolver slip during recoil. The grip is adequate for all but the largest hand sizes. Overall, the Model 206 should be nearly as concealable as a five shot small frame revolver. For home defense, the Model 206 .38 will give those on a budget much piece of mind.
In handling the revolver, the ejector rod stroke was positive and emptied all spent cartridge cases with a single stroke. Trigger action was smooth enough for good double action work. It isn’t as nice as more expensive revolvers, but it has become smoother with use. The double action press is tractable enough for accurate shooting at typical personal defense range, and the reset is fast enough to allow a trained shooter to fire the pistol both accurately and fast.
During the initial evaluation, I broke out a good supply of Winchester’s 158-grain RNL. This load is affordable and burns clean, all we can ask of practice ammunition. I began firing the revolver at 7 yards and continued until I had the measure of the M206. Placing the front sight on the X-ring of a man-sized target, I got a center hit time and again. Aim, confirm the sight alignment and sight picture, press the trigger to the rear smoothly and you have a hit. Allow the trigger to reset and press again and you have another hit.
Fifty rounds of Winchester .38 Special were well centered. This isn’t the revolver for a steady diet of +P loads, in my opinion. A 25-ounce .38 might kick and buck too much for most shooters when loaded with +P ammunition and there is also wear on small parts to consider.
Next, I fired a box of Precision Delta 148-grain wadcutters. This is the classic .38 Special target load. At 703 fps from the two-inch .38’s barrel, it was mild to fire. Accuracy in single-action fire was good for this class of handgun. This is a good training load. The revolver fires high on the order of about three inches at 10 yards with 148- to 158-grain loads. The revolver seems sighted for 110 to 125-grain defense loads.
Accuracy: Fired From a Bullshooter’s Rest, 15 Yards, 5-shot Group
|Load||Average of two groups|
|Winchester Train and Defend 130-grain FMJ||3.55 inch|
|Winchester 158-grain RNL||2.95 inch|
|Winchester 125-grain Silvertip +P||2.5 inch|
|Precision Delta 148-grain Wadcutter||2.5 inch|
The .38 Special needs +P loads for performance and despite my warning considering wear, for occasional use the +P will be chosen by most shooters. I selected the Winchester Silvertip +P. This load uses a light bullet at high velocity. Average velocity was 970 fps with the 125-grain alloy jacketed hollow point. This is outstanding from a two-inch barrel. Recoil wasn’t difficult to master and the bullet expanded well.
I fired three full cylinders through the Armscor M206 with good results. I also fired a couple of the Silvertip hollow points into water to test expansion. Performance left little to be desired. Managing to design a bullet that expands well at two-inch barrel .38 velocity isn’t easy. The Silvertip makes the grade.
The last test was to fire the revolver from a solid benchrest to confirm accuracy potential. I fired at 15 yards, which is a long shot for self defense. This tells a lot about the revolver’s quality and accuracy potential. I recorded several 3-inch groups at this range. The Armscor is clearly a suitable handgun for personal defense and one that should be on the short list of anyone in need of a personal defense handgun who strapped for cash.
Do you prefer a revolver for self-defense? What’s your impression of, or experience with, Armscor’s M206 revolver? Share your answers in the comment section.