A few months ago, Leupold introduced the VX Freedom line of riflescopes. Leupold is a quality maker that offers first-class riflescopes. Leupold is a big name in the market—perhaps the biggest—with excellent performance being the norm. Few makers would risk their reputation on a cheaper product. If it offers a quality but inexpensive riflescope, this is a good trick. The Freedom line is basically a simplified Vari X. Leupold’s iron-clad warranty applies to this line. The riflescopes are made right here in the United States.
The Vari X Freedom scope is available in a number of configurations including the popular 3x9x40, 4x13x40, and 3x9x50, among others, and an AR-specific sight.
The basic specs of the scope I chose for this test run are:
- Magnification: 3X-9X
- Objective Diameter: 40mm
- Field of View at 100 Yards: 33.7’/ to 13.6’
- Tube Diameter: 1”
- Eye Relief: 4.17”/3.66”
- Exit Pupil on 9X: 4.7mm
The Freedom scope features a nicely finished tube and trademark gold ring on the objective lens. The turrets are large and easily adjusted, and they move with a positive indent. The ocular lens may be unlocked and adjusted to keep the reticle in focus. The power adjustment ring isn’t difficult to adjust between three and nine power. It isn’t too tight and is quite positive in operation. I like this system; it is easily adjusted, but the ring isn’t going to move out of place.
The power adjustment ring is easily controlled due to the grooved knob. Even in the dead of winter when wearing gloves this system works well.
I tested the VX Freedom AR 3x9x40 with the Tactical Milliradian Reticle (TMR) reticle. I used the Leupold AR mount. This is a strong, solid mount that offers excellent rigidity. Mating it to the scope was easily accomplished. A good-quality riflescope is much easier to zero than the low-end jobs. The click adjustments are positive, offering exactly the same movement time after time.
I have been privileged to use a good many Leupold scopes over the years, and the Freedom line operates as well as the others, simply without the same features. Today’s economy optics are as advanced or more so than truly expensive scopes of a decade ago, while the expensive scopes today provide incredible performance. Adjustments are repeatable and exact.
I initially sighted in the rifle for the SIG Sauer Elite .308 Winchester loading, mounting the scope on my Ruger SR762 rifle. It wasn’t difficult to get the rifle sighted in using the box method. I like to sight the rifle to strike a little high at 100 yards.
VX Freedom TMR Reticle
The TMR reticle is well suited to all-around use. The Tactical Milliradian Reticle expands on existing mil-dot types. The TMR uses hash marks rather than dots for greater precision when holding over at long range.
Both windage and bullet-drop compensation are possible by a trained shooter. Each mil is 3.6 inches at 100 yards, and the hash marks are .5 mil apart, or .2 mil spacing on outer edges. Once you understand mils and target measurement, you may use the mils and the scope to estimate range closely, providing you have a good approximation of the target’s size. This did not come into play in my firing test, as this is a preliminary workout, but the concept is interesting and has proven quite effective.
I found the Leupold fast on target with excellent clarity. Firing from standing and from a braced firing position, the scope, rifle, and ammunition combination proved a good match. After firing more than 100 rounds of SIG Sauer Elite ammunition, I was confident of my zero and went on to test this remarkable rifle. But that is another story.