Concealed Carry

Common Gear Mistakes for the New Gun Owner

tactical gear spread out on the floor

From football to fashion, we all make mistakes as we’re learning a new skill. It’s no surprise that guns and gear are the same, especially for new concealed carriers. The wrong firearm is a common error, but there are also a ton of mistakes with accessories and gear selection. We’ve all got a box resembling a trash can filled with bits and bobs from the ghosts of firearms past. Here are some of the most common new gun owner gear mistakes. 

Nylon Universal Holsters

One mistake new shooters often make is choosing a generic Nylon holster. These are often poofy and oversized with a loose fit, thin strap, and pot metal clip. This results in poor retention and concealability, which will make your carry experience more difficult. It will also be harder to get a clean, consistent draw. The holster will not fully protect the trigger guard, jeopardizing your safety.

UTG Universal Nylon Holster
Universal holsters like this do not provide the best fit for everyday carry.

This warning extends to Uncle Mike’s Universal-type holsters as well. These are divided into different size ranges, which provide a slightly better fit. However, overall, these should be avoided for carry as they do not provide adequate retention or security. For strictly range work, perhaps to test several guns, they work in a pinch. 

Don’t cheap out on your holster. You don’t have to spend a ton to get something good quality, but the $5 bargain bin is not where you should be looking. Find something designed for your specific firearm model. Leather or Kydex are both good choices. Galco and DeSantis both offer a number of affordable models for a variety of handguns and carry positions. The DeSantis Slim-Tuk is a go-to IWB holster for many due to its slimline, minimalistic design. Galco’s Stow-N-Go is a soft leather option that’s comfortable on the hip all day long.

Range Ammo for Carry

Another common mistake often seen with new shooters and concealed carriers is using range ammo for self-defense. Full metal jacket (FMJ) ammunition should typically be reserved for training at the range. There are other solid projectile options designed for protection, but these are mostly used for animal defense outdoors. For concealed carry and home defense, you should usually turn to hollow points.

Jacketed hollow point (JHP) ammunition utilizes a projectile that expands after entering the target medium (body). This creates more muscle and soft tissue damage, which results in additional blood loss. All this works together to physiologically and psychologically stop the threat as quickly as possible. 

upset 124-grain V Crown hollow point bullet
This is an expanded hollow point bullet.

Hornady Critical Defense and Speer Gold Dot are two great hollow point options for personal protection. They provide consistent expansion and penetration across a wide range of calibers. 

Cheap Optics

I’ve seen it time and time again; people pour a ton of money into a nice firearm only to top it with a cheap optic. Now, don’t get me wrong, there are plenty of great, inexpensive optics that don’t break the bank. Holosun, Vortex, and Leapers UTG are among them. I’m talking about Amazon, Wish, and TEMU cheap here. These $50 or less optics just can’t stand up to real-world use. They’ll have trouble holding zero, experience clarity issues, and will typically break due to the shock and vibration of firing after several range sessions. 

You should also select a quality optic mount. A bad mount can ruin accuracy and prevent you from zeroing your reticle. It’s also what’s keeping your precious optic secured. The last thing you want is to watch your optic go flying across the range when you pull the trigger. Midwest Industries is one of my go-to manufacturers. 

front view of a Holosun red dot sight
Holosun produces affordable optics that stand up to actual use.

Backplates and Baseplates

I don’t understand it, but some people love to swap out their slide backplates and magazine baseplates with aftermarket options featuring unique graphics, wording, or coloration. This is mainly with Glocks, but they’re available for M&Ps and others as well. 

These clone backplates and baseplates are often mass-produced overseas for very cheap. Don’t expect any quality control. They can feature slight variations in fitment and may not have the same structural integrity as original parts. Because of this, they can often cause function issues in your firearm. 

As with other items I’ve mentioned, there are some quality exceptions. Taran Tactical Innovations, Hyve, and Strike Industries all make quality magazine baseplates with or without adding additional rounds. In most cases, they’re durable and reliable. 

Similarly, you should avoid other cheap upgrades that are common for polymer pistols, such as slide releases, mag releases, and triggers. Again, quality components can work fine, but the vast majority of the cheap options on the market are just junk. You have to pay for quality. And as the great Hunter S. Thompson said, “Anything worth doing, is worth doing right.” 

Glock 3 Percenter Backplate
Slide backplates like this will vary in quality.

Relying on Laser Aiming Device

A laser aiming device is a good asset to have. Lasers are intuitive and can help defensively and during training. An illuminated dot on the target is quick for the eye to pick up. However, relying on them too much can be detrimental. Electronics have a tendency to glitch out, often at the most inopportune times — damn Murphy… and your law! Even quality lasers can quit on you, even if you routinely change the batteries and confirm the zeroing. 

Ensure to train with iron sights as well. Optics are helpful, but again, they can experience technical issues. You should be able to naturally acquire a good sight picture as you present the firearm. 

When you do use a laser device, go with something high-quality with a positive track record. Brands such as Streamlight, Nightstick, and Holosun make quality products that go through rigorous testing to ensure they’re up to snuff. 

Aftermarket Magazines

One of the first things many of us want to do when we get a new gun is stock up on magazines. This is where you may be a bit shocked to see the rising price of spare magazines. But wait, what’s this? The same magazine for half the price — too good to be true? 

Cheap aftermarket magazines are a common source of firearm malfunctions, especially in semi-autos. They’re often not built to the same quality level and spring pressures/feed geometries may be slightly altered. This is why it is best to use OEM magazines with your firearms, especially if they’re for defensive use. 

SIG MK25 and Magazines
MecGar manufactures factory magazines for many firearms. Its aftermarket mags are just as reliable.

Some aftermarket magazines are better than others, and many are still of high quality, they just may not be the cheapest. MecGar, Magpul, and KCI all make dependable magazines for a number of different firearms. They may not be half-price, but they can save you some money. This can be a great way to stock up for training drills and plinking at the range. Quality aftermarket magazines are good to have, but they should not be considered a replacement for factory mags. 

Overloading

Even experienced shooters often make the mistake of overloading their AR-15 or tactical rifle with every accessory they can cram on there. You’ll often see multiple optics (usually something magnified along with a red dot for CQB), along with backup irons, bipod, foregrip, laser, light, and bayonet. As you gain more experience, you learn what you use and don’t use. You’ll also come to appreciate the lighter weight than a more simplistic build allots. An optic, backup irons, light, and sling are a good place to start. Keep it simple stupid (KISS); the more you have on there, the more that can get snagged or cause an issue. 

AR-15 rifle with optic and laser laying on a hard rifle case
Don’t weigh yourself down with accessories, stick to what you need.

Spring Changes

New shooters often become obsessed with getting the lightest trigger pull or recoil impulse possible with their firearm in an attempt to gain the most accuracy. Unfortunately, swapping springs to get a better trigger pull or change the recoil impulse tends to make the firearm unreliable. Unless you have this done professionally or have more experience, avoid making unnecessary changes. Instead, focus your efforts at the range and build up your marksmanship fundamentals. It’s probably the Indian, not the arrow. 

Final Thoughts

We may not have made all these mistakes, but we’ve all probably made at least one. Learning from mistakes (ours and others) is how we grow as shooters. I know, I personally ruined my first Glock by incrementally adding dumb accessory after dumb accessory until they eventually all got removed and thrown in a box in the closet. It’s a good thing that many of these “upgrades” aren’t permanent and you can quickly take your firearm back to factory configuration once you learn better. 

I’m sure there are plenty more mistakes. So, let’s hear them. What are some other common mistakes new gun owners make when selecting firearms and gear? Share your thoughts in the Comment section.

About the Author:

Alex Cole

Alex is a younger firearms enthusiast who’s been shooting since he was a kid. He loves consuming all information related to guns and is constantly trying to enhance his knowledge, understanding, and use of firearms. Not a day goes by where he doesn’t do something firearms-related and he tries to visit the range at least a couple of times a month to maintain and improve his shooting skills.

His primary focus is on handguns, but he loves all types of firearms. He enjoys disassembling and reassembling firearms to see how they work and installs most of the upgrades to his firearms himself, taking it as a chance to learn. He’s not only interested in modern handguns and rifles, he appreciates the classics for both historical value and real-world use.
The Mission of Cheaper Than Dirt!'s blog, The Shooter's Log, is to provide information—not opinions—to our customers and the shooting community. We want you, our readers, to be able to make informed decisions. The information provided here does not represent the views of Cheaper Than Dirt!

Comments (7)

  1. The real reason for hollowpoints is a fear of over penetration, not more meat mangled or more energy transfer. But there’s value in a longer wound channel and two holes to bleed out of. Depending on how much energy the ball bullet retains and how much more it traveled inside the target before exiting, results might be better than with hollow points, but they won’t be much worse. If your defensive geometry precludes any chance of an innocent behind the target, ball ammo isn’t a mistake, it’s a choice. Like defending from the top of an open staircase.

  2. I’d add to the list the refusal to buy a quality gun belt. I suffered for years using my conventional everyday belts for my concealed carry. I mean a belt is a belt , right? No.

  3. So, who has the largest “Glock” box of spare accessaries? :-). Only two accessaries I suggest are better sights than the “goal post”, and for old dry hands, it is hard to beat the Hogue grip sleeve in a matching color. Hint: Just apply a liberal coat of dishwashing liquid full strength on the inside of the Hogue Sleeve, slide the grip sleeve on, let is set for 24 hours, so the dishwashing liquid turns to a mild glue, holding the sleeve in place.

    On AR magazines, as I am not so sure anyone can even define what an OEM AR magazine might be, or be able to obtain one, and correcting Failure To Feed issues on aftermarket magazines, one day while wondering why a specific AR was having feed issues, and practicing the pulling the magazine, racking, tapping, and trying again, I just happened to look at the right place, at the right time. What I found was: As the bolt is flying forward to pickup the next round, those “physics laws” came into play, and as the forward moving bolt came in contact with the top of the rim on the “parked” round, the round would dive down, and surprisingly just the little bit of brass shoulder in the neck, was hanging up on the front of the magazine, actually ALL of the magazines at the time, as I just happen to see it before I stripped the magazine.

    The cure: I took every magazine apart, cleaned, then lubed the spring, AND THEN took the top coil of the spring, and bent it straight up vertical, resulting in putting more pressure under the nose of the round to prevent it from contacting the front wall of the magazine. I have NOT HAD another single FTF issue since doing this with any of the magazines, for several thousand rounds yet. Later I learned Magpul makes something called an “anti-tilt follower”? Hum?

  4. The author mentions overloading an AR-15. Speaking of overloading, back in the early to mid 60s, I believe it was Topper Toys that made a toy gun labeled the “Johnny Seven One Man Army” weapon. It was called Seven because it was supposed to have seven functions. I don’t remember everything it had and for the record I never owned one, though I knew kids that did. I remember that it had a removable cap gun pistol which fit inside the receiver which was removed in order to put a roll of caps in it and it could be fired independent to the rest of the weapon. There was a separate trigger for the rifle which was supposed to fire plastic bullets. Another thing it had was a spring-loaded grenade launcher with a toy grenade that according to the tv commercials really would shoot.

    When I was overseas in the early 70s, I saw several guys who had been issued M-16s with the M-203 Grenade Launcher mounted on the underside of the barrel. None of the guys on any of the teams on which I served had one, so I never saw one in action. There were guys on my team who carried M-79 Grenade Launchers and I did see those used on a number of occasions; I would also add there were several guys who called the M-16 with the M-203 a Johnny One Man Army gun. Now, whether it was an homage to the toy gun or a derisive slur toward the real weapon, I cannot say, I will let you decide.

  5. My biggest downfall when I first started with handguns was holsters. I have a bunch of them.
    I have never gotten into optics. I learned on iron sights. Optics can lose zero, malfunction, and batteries die. You don’t have those problems with iron sights. But that’s just my opinion.

  6. Interesting. I had no idea that people switched out magazine baseplates and springs. Reminds me of “A fool and his money”.

Your email address will not be published. Required fields are marked *

Your discussions, feedback and comments are welcome here as long as they are relevant and insightful. Please be respectful of others. We reserve the right to edit as appropriate, delete profane, harassing, abusive and spam comments or posts, and block repeat offenders. All comments are held for moderation and will appear after approval.

Discover more from The Shooter's Log

Subscribe now to keep reading and get access to the full archive.

Continue reading