The .30-06 Cartridge

By CTD Blogger published on in Ammunition

It’s probably the most well-known cartridge in the United States. Popular as a large game caliber, this round has probably taken more North American deer than any other cartridge, save the .30-30. But hunting wasn’t the purpose for which it was developed. This rifle cartridge saw the U.S. through two World Wars, and Korea. Of course, I’m talking about the ever popular .30-06 Springfield.

As the name implies, the .30-06 is a .30 caliber round developed in 1906, when the U.S. military saw the need for a long-range round capable of being fired from their newly developed machine guns. European military forces were beginning to use the recently designed boat-tailed spitzer bullets with superior aerodynamics and longer effective ranges. Mortars and artillery were not in widespread use at the time, with military leaders relying instead on volley fire for indirect engagement of enemy positions. Naturally, this meant that bullets would need to be able to travel in excess of 1,000 yards and still maintain sufficient velocity. The .30-03 was obsolete almost as soon as it was put into production, being a relatively heavy bullet with a round-nose tip, among other problems. Given these flaws, designers scrambled to modify the .30-03 into a more workable design and created the .30-06. The Springfield M1903 was also modified to utilize the new cartridge. By shortening the case neck slightly and completely changing the bullet from a heavy 220 grain to a sleek 150-grain spitzer, the military soon had their new solution.

After World War I, military planners noted that machine guns employed by other nations had much longer effective ranges than those used by the U.S. firing the 150-grain .30-06. It was decided that the .30-06 design needed to be improved upon in order to reach out to these longer distances. The .30 caliber M1 ball cartridge was created as the answer to this problem. A 173-grain FMJ boat-tail bullet was utilized for the M1 ball, but was later replaced with the lighter 152-grain flat-based bullet in the M2 ball cartridge when it was discovered that the M1 load was more powerful than most military ranges could safely accommodate. The lighter, faster M2 round had a muzzle velocity of around 2,740 FPS in a 24″ barrel and quickly became the standard issue ammunition for machine guns and infantry rifles, remaining in service until the development of the 7.62×51 NATO round. Nevertheless, the USMC kept some of the heavier M1 ball for use among their snipers, as that bullet was slightly more accurate and carried a bit more energy at longer ranges.

The long ranges for which the .30-06 was designed also made it very attractive to hunters and long-range target shooters seeking a cartridge was both versatile and accurate. The flat trajectory of the .30-06 makes it very effective for taking medium-sized game with little to no elevation adjustment needed for distances out to nearly 300 yards. Modern hunting ammunition in .30-06 is available in a wide variety of loads with bullets weighing between 120 and 220 grains, but is most commonly found loaded with bullets between 150 and 180 grains. The case capacity of the .30-06 brass allows it to be loaded to much higher pressures than mil-spec ammunition. Many modern cartridges are loaded to these higher pressures in rifles capable of handling the hotter loads giving the round a muzzle energy that approaches 3,000 foot-pounds.

Given the versatility of this well-rounded cartridge, it’s no wonder that it remains one of the most popular cartridges among hunters and target shooters alike.

Tell us what you think about this historical cartridge in the comment section.

Tags: ,

Trackback from your site.

The mission of Cheaper Than Dirt!'s blog, "The Shooter's Log," is to provide information-not opinions-to our customers and the shooting community. We want you, our readers, to be able to make informed decisions. The information provided here does not represent the views of Cheaper Than Dirt!

Comments (4)

  • Anonymous

    |

    173 grain wouldn’t be good for an M1 Garand, but they should be OK in bolt action rifles. I just so happen to have a 30-06 1903 a3 Springfield and would be happy to buy them from you if they are in good condition and you want to sell them. I have this set up to send me an email if anyone replies on this article.

    Reply

  • Aaron

    |

    Got about 1200 rounds of .30-06 173 gr. fmj bullets in a few military ammo cans are they still worth anything or usable

    Reply

    • Elton P. Green

      |

      Yes, they are still usable. And the M1C and D used them as sniper ammunition. If you want to get rid of that ammo, let me know.

      Reply

  • Charlie

    |

    OK! You covinced me. I’m going to rebarrel my original model Ruger M77, rather than retiring it. Somehow, those 220 grain round noses sound like a good option.

    Reply

Leave a comment

Your discussions, feedback and comments are welcome here as long as they are relevant and insightful. Please be respectful of others. We reserve the right to edit as appropriate, delete profane, harassing, abusive and spam comments or posts, and block repeat offenders. All comments are held for moderation and will appear after approval.

Time limit is exhausted. Please reload the CAPTCHA.

%d bloggers like this: